Self-Storage Building - Request For Quotation

A-Lert Building Systems appreciates this opportunity to provide you with a quotation for your self-storage construction project.

To ensure that we have enough information to accurately price your buildings, we ask that you fill out the following form as completely as possible. The default options for the pull-down lists have been set to the most typical and usually the most cost effective options.

If you have a unit layout for your buildings, please fax it to us at (830) 643-1912 and reference it as a web quote. If you have AutoCAD drawn files of the unit layout for your buildings, please e-mail the AutoCAD files to us at abscontact@centurionind.com. Please send only .dwg or .dxf type files.

Customer Information

Name:
Company:
Address:
City:
State:		Zip Code:
Country:
Phone:
Fax:
E-Mail:
Customer Type:
If other, please specify:
Shipping Destination:
Project Status:		Property Status:
Finance Status:		Delivery:
Note! Field labels in red are required fields. Fax or e-mail may be substituted for phone number.

Building Dimension Information

Bldg.	Qty.	Width	Length	Eave Height	Roof Slope	Roof Type	Front Side Unit Size	Back Side Unit Size	Left End Unit Size	Right End Unit Size
A
B
C
D
E
Example:
Notes: The standard building sizes are based on 5', 10' or 12' module increments. Unit sizes selected will be used to adjust the building widths or lengths in cases of discrepancy. The standard eave height is 8'-6". The standard roof slope is 3/8" in 12". The standard door sizes are 3'x7' for 5' wide units, 8'x7' for 10' wide units, and 10'x10' or 10'x12' for 12' wide units. Other door sizes are available upon request. Buildings with 12' wide units are typically for boat and/or RV storage. The eave height should be either 12' or 14' high. Buildings on the property boundary, typically have single sloped roofs. Buildings on the interior of the property, typically have double sloped roofs.

Building Design Information

Building Code	Roof Live Load PSF	Collateral Load PSF	Wind Load MPH	Wind Exposure Factor	Seismic Zone	Importance Factor

Notes: Your self-storage building quotation will be based on the design criteria specified above, so if you do not know what your local building authority uses for building codes, PLEASE DO NOT GUESS. Call your local building department for this information, or call A-Lert at (800) 210-5375 and ask our Estimating Department for assistance. Any fields left blank will be substituted with design criteria typically used in the area of the shipping destination. Final design information may affect the quoted price. Collateral load is any roof load such as : HVAC, ceilings, powered vents, or fire protection sprinklers. Dead load is the combined weight of the building structure. Importance Factor is determined by the building end use category.

Roof and Wall Systems

Gage, Panel Type and Finish

Roof Options

Yes

Wall Options

Roof Panels:

Gutters w/ D.S.:

Mullion Style:

Wall Panels:

UL90 Roof:

Door Headers:

Partition Panels:

Northern Roof:

Building Trim:

20 yr. Warranty:

Notes:
Northern Roof option includes wide mastic, extra screws, thermal blocks and extra gutter straps.
UL90 is a roof system uplift rating as specified by the Underwriters Laboratories.
UL90 standing seam roofs will receive A-Lert's SS216 (16" wide) panels.
Standard and Premium color charts are available by mail upon request.
Premium colors, if selected, will be an additional cost.
20 yr. Warranty may not be available on some colors.

Standard Colors:

Hawaiian Blue	Crimson Red	Fern Green	Burnish Slate	Koko Brown	Aztec Gold	Charcoal Grey	Gallery Blue


Ash Grey	Saddle Tan	Desert Sand	Polar White	Rustic Red	Light Stone	Colony Green

Additional Options

	Yes	No
Include Roll Up Doors:			Roof Insulation:
Include Mesh For Insulation:			Wall Insulation:
Include Labor For Erection:			Standing Seam Type:	(If applicable)
Notes: Standard roll up doors include latch sets, tensioning devices and shaft bearings. Other options are available. Mesh for insulation will be a "chicken wire" type for the roof insulation only. Including labor for erection may affect delivery for coordination of crew schedules. Roof and wall insulations will have reinforced white vinyl back (WMPVR). Roof insulations thicker than 3" will receive a high clip system. Standing seam "floating" clip systems allow for thermal expansion, and are generally not needed on small building widths.

Additional Information

If there is any additional information we should know about your buildings, please provide us with as much information as is possible in the area below. Some special conditions might be step downs in roof due to site elevations, special loading or design, tie-ins to existing buildings, and special roof framing. Please include the orientation of the condition from the front left corner of the building.

Inquire about additional services and products at (800) 344-0609, via e-mail at abscontact@centurionind.com, or via fax at (830) 643-1912

| | | | | | | | | | |

[2065 FM 1102 New Braunfels, TX 78132 ]
[ 800-344-0609 or 830-626-7755 Fax: 830-643-1912 ]

[ A-Lert, Centurion and TFC are trademarks of Centurion Industries, Inc. ]
[ © Centurion Industries, Inc. ] [ disclaimer ]